Brand
Categories
Home
Aluminium Anodized Cylinder Tube Ø30 mm x Ø25 mm H11
H11 Anodized inside and outside
Layer thickness 20 µm
Weight: 0.60 Kg/m
Gears Hydraulic Pump
Rotation: Right
Shaft: European Tapered 1:8 or SAE A.
Mounting: European 4 Holes.
Ports: GAS or Flanged
Body: Aluminum
Sold out
Hydraulic Power Unit 1.7 cc/rev, Max Pressure: 50 bar, 1 Hp 220 V AC sigle phase electric motor
Sold out
Inner diameter: 200 mm.
Outside diameter: 210 mm.
Wall thickness: 5 mm.
Anodised insed and outside 20 μm
Hardeness 420 HV
Weight: 9,02 Kg/m.
Steel grade: Aluminium EN AW-6063 T66
Gears Hydraulic Pump
Rotation: Right.
Shaft: European Tapered 1:8.
Mounting: European 4 Holes.
Ports: GAS or Flanged
Body: Aluminum
Sold out
Hydraulic Power Unit 8.4 cc/rev pump designed to operate at 40 bar with a 1 Hp 220V 50 Hz single-phase electric motor, 30L tank and horizontal mounting.
Sold out
Electric motor 0,5 Hp, 220 VAC 50Hz, single phase.
Hydraulic pump 0,63 cc/rev (0,85 L/min)
Directional control valve 2 ways, 2 positions normally closed, 220 VAC. (2 units).
Pressure gauge 0-160 bar.
Needle valve to...
Gears Hydraulic Pump
Group 2.5
Rotation: Right.
Shaft: European Tapered 1:8 or Straight SAE B.
Mounting: European 4 Holes.
Ports: GAS
Body: Aluminum
Pressure max. 250 bar
Hydraulic Gear Pump.
Displacement: 1.2 cc/rev (1.8 L/min @ 1500 rpm)
Maximum working pressure: 250 bar.
Shaft: 1:8 taper.
Mounting: European 4-hole.
Body material: Aluminum.
Rotation: Right-hand.
Ports: GAS (BSP)...
Sold out
The hydraulic group is designed to work with the cylinders in double effect, (not as simple effect).
By putting the normally closed non-return valves, we prevent the system from falling in the event of an electrical...
Sold out
Hydraulic Power Unit model PHYZ947374
1.5 HP Electric motor 220 VAC single phase.
Hydrualic pump: 9,8 cc/rev.
Max working pressure: 35 bar.
Double solenoid directional control valve, 4 ways, 3 posicion, closed...
Showing 1-12 of 110 item(s)
English
Español 
&media=https://www.provectus.es/4943-large_default/hydraulic-pump-18-lmin-250-bar-18-tapered-shaft-gas-ports-bsp.jpg){kind=link}
