Brand
Categories
Home
Flow divider with:
Maximum working pressure: 250 bar.
Minimum flow: 10 L/min.
Maximum flow: 25 L/min.
Recommended flux: SO 6743 Tipo HM, HV ó HG; ISO 3448 Cat. VG32, VG46
Fluid temperature range: -20°C a +80°C...
Sold out
HIDRONIT CB6,0 Hydraulic pump 6 cc / rev, maximum intermittent pressure 180 bar, rotation axis right , Tang shaft, Body without rear ports 3/8 "BSP port.
Sold out
Hydraulic Pump Vickers Brand, variable displacement, pressure compensator integrated 17 to 210 bar.
Compact hydraulic power station from 3 - 10 (HP) at 220 V 50 Hz, with a pump of 4.2 cc / rev and a maximum pressure of 150 bar
Sold out
4 Section Flow Divider
Displacement per section: 3,8 cc/rev.
Flow fange 4-21 L/min.
Recomended flow: 8.5 L/min.
Single preassure relief valve.10-105 ó 70-210 bar.
Model: RV-1S/3,8 X 4 + D
Sold out
Pump 11.8 cc / rev,
Left turn,
Charge pump coupled to the main transmission pump.
The new pump measures 96 mm long while the original measured 78.5 cm, measured from the rear cover to the assembly.
(Axis not included)
Sold out
Electric motor 0,5 Hp, 220 VAC 50Hz, single phase.
Hydraulic pump 0,63 cc/rev (0,85 L/min)
Directional control valve 2 ways, 2 positions normally closed, 220 VAC. (2 units).
Pressure gauge 0-160 bar.
Needle valve to...
Sold out
3 Section Flow Divider
Displacement per section: 4,9 cc/rev.
Flow fange 5.5-27 L/min.
Recomended flow: 11 L/min.
Single preassure relief valve.10-105 ó 70-210 bar.
Model: RV-1S/4,9 X 3 + D
Sold out
Flow divider 50%-50%
Inlet flow: 6,5 a 11,5 L/min.
Ports: 3/8" BSP (3 ports, 1 inlet y 2 outlets)
Max. working pressure: 210 bar.
Brand OMT
Sold out
Hydraulic Power Unit 1.7 cc/rev, Max Pressure: 50 bar, 1 Hp 220 V AC sigle phase electric motor
Sold out
Compact Hydraulic Power Unit 0,40 cc/rev designed to operate at 130 bar with an electric motor 0,33 Hp at 220 VAC 50 Hz, 2,5L tank and horizontal mounting.
Showing 13-24 of 260 item(s)
English
Español 
