Brand
Categories
Home
Sold out
The hydraulic group is designed to work with the cylinders in double effect, (not as simple effect).
By putting the normally closed non-return valves, we prevent the system from falling in the event of an electrical...
Flow divider with:
Maximum working pressure: 250 bar.
Minimum flow: 10 L/min.
Maximum flow: 25 L/min.
Recommended flux: SO 6743 Tipo HM, HV ó HG; ISO 3448 Cat. VG32, VG46
Fluid temperature range: -20°C a +80°C...
Sold out
Hydraulic Power Unit model PHYZ947374
1.5 HP Electric motor 220 VAC single phase.
Hydrualic pump: 9,8 cc/rev.
Max working pressure: 35 bar.
Double solenoid directional control valve, 4 ways, 3 posicion, closed...
Flow regulation valve 3/8" BSP
Allows flow in one direction, while regulating it in the other one.
Sold out
Compact Hydraulic Power Unit 60.8 cc/rev designed to operate at 65 bar with an electric motor15Hp 50 Hz,180L tank and horizontal mounting.
Sold out
4 Section Flow Divider
Displacement per section: 3,8 cc/rev.
Flow fange 4-21 L/min.
Recomended flow: 8.5 L/min.
Single preassure relief valve.10-105 ó 70-210 bar.
Model: RV-1S/3,8 X 4 + D
Sold out
3 Section Flow Divider
Displacement per section: 4,9 cc/rev.
Flow fange 5.5-27 L/min.
Recomended flow: 11 L/min.
Single preassure relief valve.10-105 ó 70-210 bar.
Model: RV-1S/4,9 X 3 + D
Flow regulation valve 3/8" BSP
Allows flow in one direction, while regulating it in the other one.
Sold out
Compact Hydraulic Power Unit 1,2 cc/rev designed to operate at 220 bar with an electric motor 1,5 Hp at 220 VAC 50/60 Hz, 2,5L tank
Flow regulation valve 3/8" BSP
Allows flow in one direction, while regulating it in the other one.
NEW
Sold out
Flow divider 50%-50%
Inlet flow: 6,5 a 11,5 L/min.
Ports: 3/8" BSP (3 ports, 1 inlet y 2 outlets)
Max. working pressure: 210 bar.
Brand OMT
Sold out
Compact Hydraulic Power Unit 4,2 cc/rev (6 L/min @ 1500 rpm) designed to operate at 90 bar with an electric motor of 1.5 Hp at 220 VAC Single phase, 50 Hz, 5L tank and horizontal mounting.
Showing 13-24 of 67 item(s)