Brand
Categories
Home
Sold out
Compact Hydraulic Power Unit 10 cc/rev designed to operate at 120 bar with an electric motor 5,5 Hp at 380 / 660V 50 Hz, 75L tank vertical mounting.
Flow divider with:
Maximum working pressure: 250 bar.
Minimum flow: 10 L/min.
Maximum flow: 25 L/min.
Recommended flux: SO 6743 Tipo HM, HV ó HG; ISO 3448 Cat. VG32, VG46
Fluid temperature range: -20°C a +80°C...
Sold out
4 Section Flow Divider
Displacement per section: 3,8 cc/rev.
Flow fange 4-21 L/min.
Recomended flow: 8.5 L/min.
Single preassure relief valve.10-105 ó 70-210 bar.
Model: RV-1S/3,8 X 4 + D
Compact hydraulic power station from 3 - 10 (HP) at 220 V 50 Hz, with a pump of 4.2 cc / rev and a maximum pressure of 150 bar
Hydraulic gear pump.
Displacement: 2.1 cc/rev. (3.15 L/min @ 1500 rpm)
Rotation: Right-hand.
Shaft: 1:8 tapered.
Mounting: European 4-hole.
Ports: GAS.
Body material: Aluminum.
Max. pressure: 250 bar.
Hydrosila...
Sold out
3 Section Flow Divider
Displacement per section: 4,9 cc/rev.
Flow fange 5.5-27 L/min.
Recomended flow: 11 L/min.
Single preassure relief valve.10-105 ó 70-210 bar.
Model: RV-1S/4,9 X 3 + D
Hydraulic gear pump.
Displacement: 2.5 cc/rev. (3.75 L/min @ 1500 rpm)
Rotation: Right-hand.
Shaft: 1:8 taper.
Mounting: European 4-hole.
Ports: GAS.
Body material: Aluminum.
Max. pressure: 250 bar.
Hydrosila model:...
Sold out
Electric motor 0,5 Hp, 220 VAC 50Hz, single phase.
Hydraulic pump 0,63 cc/rev (0,85 L/min)
Directional control valve 2 ways, 2 positions normally closed, 220 VAC. (2 units).
Pressure gauge 0-160 bar.
Needle valve to...
Hydraulic gear pump.
Displacement: 3.2 cc/rev. (4.8 L/min @ 1500 rpm)
Rotation: Right-hand.
Shaft: 1:8 tapered.
Mounting: European 4-hole.
Ports: GAS.
Body material: Aluminum.
Max. pressure: 250 bar.
Hydrosila model:...
Sold out
Hydraulic Power Unit 1.7 cc/rev, Max Pressure: 50 bar, 1 Hp 220 V AC sigle phase electric motor
Sold out
Flow divider 50%-50%
Inlet flow: 6,5 a 11,5 L/min.
Ports: 3/8" BSP (3 ports, 1 inlet y 2 outlets)
Max. working pressure: 210 bar.
Brand OMT
Hydraulic Gear Pump
Displacement: 4,5 cc/rev. (6,75 L/min @ 1500 rpm)
Rotation: Clockwise.
Shaft: tapered 1:8.
Mounting flange: European 4 holes.
Ports: BSPP.
Body: Aluminium.
Hydrosila Model: GP2K4R-G261G
Showing 13-24 of 190 item(s)
English
Español 
&media=https://www.provectus.es/4953-large_default/hydraulic-pump-315-lmin-shaft-type-tapered-18-port-type-gas-bsp.jpg){kind=link}
&media=https://www.provectus.es/4960-large_default/hydraulic-pump-375-lmin-shaft-type-tapered-18-port-type-gas-bsp.jpg){kind=link}
&media=https://www.provectus.es/4958-large_default/hydraulic-pump-48-lmin-shaft-type-tapered-18-port-type-gas-bsp.jpg){kind=link}
&media=https://www.provectus.es/5096-large_default/hydraulic-pump-675-lmin-shaft-type-tapered-18-port-type-gas-bsp.jpg){kind=link}